- +1 (929) 257-9396
- 24/7 Emergency Service
Menu
Brick veneer siding cost per square foot varies significantly depending on which system you choose, and understanding the difference matters more than most homeowners realize going in:
Brick veneer siding cost per square foot for thin veneer sits at the accessible end of this range specifically because it can often be installed directly over existing sheathing without a structural shelf angle — sidestepping one of the most expensive potential add-ons in a brick project entirely.
Thin brick veneer vs full brick is the single most consequential choice in a brick siding project, and it affects nearly every other cost line on the estimate. Full brick veneer — the classic system with standard modular bricks laid in mortar and metal wall ties — requires a structural shelf angle or ledger at the base of the wall to support the weight. If your existing foundation doesn’t extend far enough to support one, foundation modification adds $5 to $15 per square foot on top of the base installation cost, and can push a mid-size project from the $20,000s into the $30,000 to $50,000-plus range.
Thin brick veneer vs full brick resolves this problem entirely on the thin veneer side — because it weighs a fraction of full brick, it can frequently be installed over existing sheathing without any foundation work at all. This is precisely why thin veneer dominates re-siding projects specifically, as opposed to new construction where a shelf angle can be designed in from the start at minimal added cost.
Siding removal cost is a line item many homeowners forget to budget for until it appears on the estimate. Removing existing vinyl siding runs $1 to $2 per square foot, while removing old brick runs $3 to $6 per square foot — plus debris disposal typically adding $250 to $500 to the total project. Budget $150 to $1,500 for removal depending on your home’s size and the material coming off.
One way to reduce siding removal cost specifically: thin veneer can sometimes be installed directly over existing sheathing if the substrate underneath is in good condition, skipping demolition and disposal entirely. This is worth asking your contractor to assess during the initial inspection, since it can meaningfully shift your total budget.
Beyond the brick material and labor itself, a complete cost to replace siding with brick estimate includes several line items that surprise homeowners expecting a single per-square-foot number:
Permits. Most brick installations are structurally significant enough to require a permit, typically running $150 to $1,500 depending on your municipality. If foundation or ledger work is involved, a structural engineer review may also be required, and this can add meaningfully to both cost and project timeline.
Materials and mortar. Brick material itself runs $3 to $10 per square foot separate from labor, with mortar and additional supplies adding roughly $0.50 per square foot on top.
House size. Square footage is always the single biggest driver of total project cost — a 1,000 square foot home might land near the low end of any per-square-foot range, while a 5,000-plus square foot home pushes total cost into six figures purely due to surface area.
Flashing and drainage. Proper flashing and drainage channels behind the brick veneer are essential for moisture management and are a required part of any properly installed system, not an optional upgrade.
Partial vs. full coverage. If full-exterior brick is out of budget, bricking just the front facade — typically 250 to 750 square feet — is a widely used strategy that delivers most of the curb appeal impact at a meaningfully lower total cost.
Comparing cost to replace siding with brick against other common materials puts the investment in perspective. Vinyl siding costs $4 to $12 per square foot and lasts 30 to 40 years. Fiber cement runs $4.70 to $8.50 per square foot and lasts 50-plus years. Brick, at $8 to $18 per square foot for standard veneer, sits at the premium end but delivers a lifespan that dramatically outperforms both — clay brick specifically can last 100-plus years with essentially zero material degradation.
Brick siding also increases home appraisal value by roughly 6 to 8 percent according to industry cost-versus-value data, and its thermal mass provides genuine energy efficiency benefits that lighter materials like vinyl and aluminum can’t replicate. For homeowners planning to stay in a property long-term, this combination of longevity and near-zero maintenance frequently justifies the higher upfront cost to replace siding with brick compared to materials that will need full replacement one or even two more times over the same ownership period.
Brick siding installation Bronx projects carry a few considerations specific to this region worth factoring into your budget. Many pre-war Bronx rowhouses and brownstones already feature original brick facades, and matching new brick veneer to existing masonry — for partial additions or repairs — requires careful color and texture matching that adds labor time compared to an all-new brick installation on a previously vinyl-sided home.
The Bronx and Westchester’s 25 to 35 annual freeze-thaw cycles also make proper flashing and drainage detail especially important on any brick siding installation Bronx contractors take on — moisture management behind the brick veneer matters more in this climate than in milder regions, since trapped moisture that freezes repeatedly accelerates mortar joint deterioration significantly faster than a stable climate would.
The only reliable way to know exactly how long does it take to replace a skylight on your specific roof is an in-person assessment — roof pitch, ceiling type, and existing opening condition all factor into a realistic estimate that a phone quote can’t provide. Get at least three written estimates, confirm the contractor is licensed and insured, and never pay in full upfront — a payment structure tied to project milestones protects you if something goes wrong mid-project.
According to the National Association of Home Builders, exterior cladding decisions like siding material represent some of the most consequential long-term choices in residential construction, directly affecting both durability and resale value. A trustworthy brick siding estimate reflects that weight — it should be written and itemized, clearly specifying veneer type (thin vs. full), whether foundation modification is needed, removal and disposal costs, and permit fees separately rather than one lump sum.
Compare at least three estimates before deciding, and be cautious of any bid significantly below the ranges outlined above — underpriced brick projects often mean corners are being cut on flashing, drainage, or structural support that won’t surface as a problem until years later, when the fix costs far more than the original savings.
The Quick Guys installs brick veneer and other premium siding materials throughout the Bronx and Westchester County, with every project including a thorough assessment of your existing structure to determine whether thin veneer or full brick is the right fit — and whether foundation work will be needed before we ever quote a final number. If you’re still deciding between siding materials broadly, see our guide on average cost to replace siding on house for a comparison across vinyl, fiber cement, and other common options.
We hold New York State license WC-38593-H25 and carry full general liability insurance. We serve Riverdale, Mott Haven, Pelham Bay, Fordham, Yonkers, White Plains, Scarsdale, and surrounding areas. Call (929) 257-9396 for a free, written estimate.
Cost to replace siding with brick varies by a factor of five or more depending almost entirely on one early decision: thin veneer versus full traditional brick. That single choice determines whether foundation modification enters the conversation, and foundation work is consistently the line item that turns a $20,000 project into a $40,000 or $50,000 one.
Brick’s durability and near-zero maintenance make it one of the strongest long-term siding investments available, but the upfront cost only makes sense when the estimate honestly accounts for your home’s specific structural situation from the start — not as a surprise change order once demolition has already begun.
Contact The Quick Guys directly:
Phone: (929) 257-9396 — call or text, available 7 days
Email: info@thequickguys.com
Website: thequickguys.com
Service area: Westchester County, the Bronx, Yonkers, White Plains, Scarsdale, and surrounding areas
For a broader material comparison, see our average cost to replace siding on house guide. Call (929) 257-9396 to schedule a free, written estimate.
Cost to replace siding with brick ranges from $10,000 for thin veneer on a small home to $50,000 or more for full brick requiring foundation work. A typical 2,000 square foot home lands between $20,000 and $36,000 with thin veneer.
Thin brick veneer runs $10 to $18 per square foot installed. Full brick veneer with structural support runs $12 to $24 per square foot. Faux-brick panels cost $14 to $24 per square foot.
Thin veneer is lighter and can often be installed over existing sheathing without foundation modification, making it significantly more accessible for re-siding projects. Full brick requires a structural shelf angle, which can add $5 to $15 per square foot if your foundation needs modification.
Removing existing vinyl siding costs $1 to $2 per square foot. Removing old brick costs $3 to $6 per square foot. Debris disposal typically adds $250 to $500 to the total project.
Yes. Brick siding increases home appraisal value by roughly 6 to 8 percent, and clay brick can last 100+ years with minimal maintenance, making it one of the strongest long-term siding investments compared to vinyl or fiber cement.
Beyond material and labor, expect permits ($150-$1,500), potential structural engineer review, siding removal and disposal, and proper flashing and drainage detail — especially important given the Bronx and Westchester’s frequent freeze-thaw cycling
Yes. Bricking just the front facade — typically 250 to 750 square feet — is a common strategy that delivers significant curb appeal impact at meaningfully lower cost than full-exterior brick siding.
